ALU1 Home - Application Directions

Video: https://youtu.be/XecUa2_Ygq8?si=gLOFqAMOQ47Wy8zp

During cleaning and application all surfaces must not be in direct sunlight and must be cool to the touch. For best results, apply when your chosen area is out of direct sunlight for 1 hour after final coating.

Always wear gloves provided during this process

Spray surface with Prep 1, wipe clean with blue microfiber cloth, removing any heavy debris.
Spray and scuff the surface with Prep 1, using scuffing pad, make sure the surface is kept, wet with Prep 1, to ensure an even scuff on the surface.
Wipe back with a blue microfiber cloth, checking as you go.
Spray with Prep 2 and wipe it clean with white microfiber cloth.
Spray with Prep 3 and wipe it clean with white microfiber cloth to ensure that all cleaning product is removed.
Ensure joinery is dry and no water is present at edges
Add 5-6 drops of coating to the middle of the speed brush.
With even pressure, firmly wipe the product onto the joinery with a smooth long flowing motion.

Start from an edge, follow the flat face of the joinery. Check for absorbency, if it looks dry apply another 2 drops of coating to the speed brush.
Level the product out across all edges, in smooth light passes.
After approx. 60-90 seconds the coating will cure, visually creating large flat and raised sections. At this point using the finishing towel (scrunched), rapidly wipe 3-4 times with medium pressure.
If there are visual damp spots, turn the finishing towel over and lightly repeat 3-4 wipes moving quickly over the damp spots.
The final coating must not be touched or wet for 3 hours after application.